Your search for mechanical properties resulted in 54 matches...
The Inconel 740 type nickel alloy was melted in a vacuum, medium frequency induction furnace. During melting the inert gas (argon) atmosphere was used Metal was poured into a ceramic mould based on ethyl silicate. ...
more >>
The article presents the results of research on the selection of optimum technological parameters of the hot-chamber die casting machine operation to make castings in AM50 magnesium alloy, coated next with the deco...
more >>
Ordered cellular constructions are an important structural element used in armaments, aerospace and automotive industry. The use of Rapid Prototyping technique and control of solidification process allow making cas...
more >>
The paper presents the results of examinations of composite samples in which the reinforcement is waste fly ash from power plants, while matrix is an aluminium (A8). The agglomerates of master composite obtained by...
more >>
The article discusses problems related with the evaluation of the effect of modification and multivariant heat treatment on mechanical properties of CuAl10Fe3Mn2 aluminium bronze. The evaluation was based on the re...
more >>
The role of interstitial elements, i.e. nitrogen and boron, in the process of ductile iron solidification and heat treatment of castings was discussed. Austempering of ductile iron aims at obtaining an ausferritic ...
more >>
Comparative studies were made on modification of aluminium CuAl10Fe3Mn2 bronze by application of modifiers affecting changes in surface properties (Na, K, Ca, Mg) and providing additional substrates for crystallisa...
more >>
The effect of heat treatment on structure and mechanical properties of B1044 (CuAl10Fe4Ni4) alloy was investigated. In the examined alloy, the content of aluminium, iron and nickel results in the formation of struc...
more >>
The study formed a part of industrial (applied) research executed under Target Project ROW-II-403/2008 at MAGNUS-NORD in Toruń. The aim of the study was to select the heat treatment parameters ensuring the require...
more >>
High-alloyed Cr-Ni-Cu cast steel with additions of Mo and Nb and high nitrogen content was melted. The cast test ingots were subjected to a heat treatment. Metallographic examinations were made under an optical mic...
more >>
The GX5CrNiCu16-4 martensitic cast steel with graded nitrogen content comprised in a range of 0,064-0,12% was melted; the chemical composition, including oxygen and nitrogen content, was determined. Test bars were ...
more >>
The study presents an analysis of the possibilities to change the fabrication technology of a rocker for automotive applications, changing also the type of material used for this element. The application of high-st...
more >>
The aim of this publication is to assess the effect of different types of the standard heat treatment on changes in mechanical properties at room temperature of magnesium alloy from AZ91 family referred to the same...
more >>
The article is devoted to complex studies of diamond-like coatings applied by the PAPVD technique to improve the surface of medical tools and implants in terms of better anticorrosive behaviour and biocompatibility...
more >>
The study presents the results of structure examinations and mechanical tests carried out on coatings based on Cr3Cr2-NiCr chromium carbide, applied onto the surface of ductile iron castings. The chromiu...
more >>
Properly conducted heat treatment of cast magnesium alloys is a very important tool in increasing the mechanical properties of castings. Nevertheless, during high temperature annealing of castings made from magnesi...
more >>
The effect of solution heat treatment with jet cooling and modification with C + Ca and CaC2 on the behaviour of BA1044 alloy in as-cast state, and after solution heat treatment and toughening was examined. The microjet modification and...
more >>
This paper presents the results of research work related with the effect of calcium on the microstructure and mechanical properties of AZ91 alloy. Samples of appropriately prepared alloy grades containing the addition of calcium in different conce...
more >>
The paper presents the results of examinations of composite samples in which the reinforcement is waste fly ash from power plants, while matrix is aluminum (99,98 wt.%). The agglomerates of master composite obtained by mechanical alloying were sub...
more >>
In the present paper research results of microstructure and selected mechanical properties of composite on EN AC-AlSi11 alloy matrix with reinforcement in the form of particle of Cr-Fe-C alloy (composite ex situ) and carbonitrides Ti, Zr, V (compo...
more >>
The presented paper is a description of one of the modules of the CAPCAST system which allows determination of recommended materials made of ductile cast iron which show specific properties or may achieve the desired properties after an appropriat...
more >>
The presented article is the first in the series, which presents research related to the improvement of technology for producing brake blocks for the railway industry in the Spomel foundry in Lębork.The cooperation with the Foundry Research...
more >>
The paper presents the possibility of obtaining highquality silumin castings with enhanced mechanical properties. It ensures the effective use of the multipoint water mist cooling system which is managed by a dedicated computer program....
more >>
Recycling of magnesium alloys is a complex issue not only because of their high reactivity and flammability even below melting temperature, but primarily because of a lack of equipment and experience in foundries. Nonetheless the environmental fac...
more >>
The presented article is the second in the series, which presents research related to the improvement of technology for producing brake blocks for the railway industry in the Spomel foundry in Lębork. The cooperation with the Foundry Research Ins...
more >>
The paper presents results of wrought alloys casting trials under external pressure. Three alloys were used in the experiment - namely: 2024, 6061 and 7075. The examinations were conducted on squeeze cast parts that solidified under high pressure ...
more >>
The work herein presents the tests to produce austempered vermicular cast iron (AVCI - Austempered Vermicular Cast Iron) and the results of examination of the produced AVCI. The work includes the methodology of heats, the structure of the AVCI bef...
more >>
Based on the results of dilatometric investigations, parameters of standard single-step and multi-step (or non-isothermal) ADI heat treatment were optimised. The optimisation was based on analysis of the heat treatment processes simulated under la...
more >>
The effect of tungsten on the solidification process, microstructure and mechanical properties of silumin 226 under the conditions close to equilibrium during pressure die casting was discussed. An increase in both mechanical and plastic propertie...
more >>
The article describes several variations of the semi-solid metal processing (SSM) technique rendering castings with non-dendritic structure and significantly improved mechanical properties. The metal slurry was produced using the Rapid Slurry Form...
more >>
In the research part of this study, several types of materials were proposed, including ADI (Austempered Ductile Iron) subjected to four different types of heat treatment, using cast manganese steel and cast nickel-copper steel. The use of these m...
more >>
The subject of the study is the analysis of the microstructure and mechanical properties of cast G200CrNiMo4-3-3 steel. The investigated alloyed cast steel, containing approximately 2% C, is nearly an ideal material for the hot mill work rolls, an...
more >>
The article discusses the possibilities of applying direct multiple remelting as an easy as well as substantially and economically justified method of recycling composites with an A359 alloy matrix reinforced with Al2O3 parti...
more >>
The article presents the results of studies of hypoeutectic silumin with a molybdenum addition used for pressure casting. The studies included a thermal-derivative analysis of the crystallization process, a metallographic analysis of the microstru...
more >>
The new technological challenges and the high economical and commercial potential connected with the development of new generation soldering alloys used in the consumer electronics lead-free soldering technology is a subject which is gaining incre...
more >>
The study presents the general data on modern cast iron with vermicular graphite, developed in Poland, which can be successfully used for casts of machine and device elements, especially those working under the conditions of thermal fatigue....
more >>
The procedures of grain refinement and modification of a silicon eutectic in hypo- and transeutectic silumins belong to important factors shaping their microstructure as well as physico-mechanical and technological properties. Due to this fact, th...
more >>
The study analyzes the effect of Ni and Cu additions on the mechanical properties of ADI cast iron in casts with different wall thickness values. The applied experiment plan included the use of combinations of the Ni addition in the amount of 0.5%...
more >>
The paper presents the results of the study of Al-Si alloys with a vanadium addition used in pressure casting. The hypoeutectic Al-Si alloy grade EN AC-46000 was applied as the initial alloy. The master alloy AlV10 was introduced into the initial ...
more >>
The article presents the results of investigations into castings made of four aluminum alloys produced with the use of squeeze casting technology.The investigations used the following alloys: EN AW 7022 (AlZn5Mg3Cu) and its modification with...
more >>
Silicon nitride powder with a small addition of magnesium oxide and yttria stabilized tetragonal zirconia fine particles was used as a starting material. Multilayer graphene nanoplatelets were used as filler for silicon nitride based composites. G...
more >>
A new non-combustible, non-flammable, waterproof, long-lasting, heat-insulating composite material was made of glass foam granules (derived from glass waste) and a hydraulic inorganic binder in the form of a white Portland cement solution (CE...
more >>
One of the aspects of sustainable development is the reduction of the concentration of CO2 in the atmosphere. This could be achieved for example by the reduction of fuel consumption. That is why the research for the new construction and...
more >>
Viscous flow behavior of amorphous Zr65(Ni,Pd)35 alloy has been studied at a heating rate of 20 K/min. The viscosity experimental results are interpreted on the basis of the free volume model. The values of the model paramete...
more >>
Two different spheroidization methods were compared in terms of the effect they may have on gas content (oxygen, nitrogen and hydrogen) in ductile iron castings and process efficiency.Two methods of cast iron treatment were investigated, i.e...
more >>
This study presents selected issues regarding the process of obtaining ausferrite from spheroidal cast iron without the application of thermal treatment to the casts. An ausferritic matrix, as well as strong mechanical properties, also ensures hig...
more >>
The paper presents the results of studies of hypoeutectic silumin with a chromium addition used for pressure casting. A silumin with the composition similar to that of EN AC-46000 was used as the initial one. In order to introduce chromi...
more >>
CADI (Carbidic ADI) - ausferritic ductile iron containing carbides - is a relatively new engineering material which exhibits excellent wear resistance and adequate impact strength. In this work the influence of two-step austempering process on sel...
more >>
In the technology of ductile iron manufacture, graphite precipitates take the form of spheroids, and this shape has the least harmful effect on cast iron mechanical properties. The strength of ductile iron depends mainly on its matrix, and hence o...
more >>
The aim of the second part of the study was to make utility castings of refractory nickel alloys, traditionally processed plastically, intended for use in extremely difficult conditions. The related technological problems and obtained ef...
more >>
The paper presents the results of investigations into the microstructures of composite materials produced by pressure infiltration of preforms of ceramic α-Al2O3 particles with aluminium alloy EN AW-2024. In particular,...
more >>
Ductile iron castings are widely used in many industrial branches because of their mechanical properties. The production process of such a grade of cast iron requires the maintenance of the technological regime and the purity of initial charge mat...
more >>
The paper presents an attempt to assess the mechanical properties of high-strength AlZnMgCu aluminium alloy samples cast in gypsum moulds. The first stage of the study involved the use of computer simulations to select the opti...
more >>
The paper presents the results of works concerning the optimisation of the process of steel melting for castings of industrial fittings in an induction furnace with an acid lining. Materials containing high activity elements such as Al, Ca, Ti, Zr...
more >>
| 
