Your search for chemical composition resulted in 23 matches...
The characteristics of goldsmith objects included in the collection of Regional Museum in Torun were presented. The results of the chemical composition measurements taken by XRF method on a Niton device on hundreds...
more >>
The GX5CrNiCu16-4 martensitic cast steel with graded nitrogen content comprised in a range of 0,064-0,12% was melted; the chemical composition, including oxygen and nitrogen content, was determined. Test bars were ...
more >>
The principles of operation of a portable X-ray microfluorescence analyser of the chemical composition were described. A short characteristic of the Niton device was also given. Examples of chemical compositions of...
more >>
The study presents the results of structure examinations and mechanical tests carried out on coatings based on Cr3Cr2-NiCr chromium carbide, applied onto the surface of ductile iron castings. The chromiu...
more >>
The article is a compilation of the most important results obtained during execution of own research project regarding the possibility of using fly ash formed during combustion of hard coal as a base granular material ...
more >>
Nanomaterials extend the range of their application in human activities. The past few years have faced a considerable increase of interest in various aspects of the application of nanotechnology in liquid phase met...
more >>
This work reviews the current state of research regarding high temperature sulphidation resistance of Fe-Cr-Al steels that belong to a family of AFA (Alumina Forming Alloys). The behavior of these steels in hot gas...
more >>
The objective of the present study was to evaluate a method for the measurement of oxygen activity in liquid cast iron to predict the cast iron properties after solidification. A series of experimental melts were made, testing the activity of oxyg...
more >>
The results of technological tests (chemical composition, solidification curves, microstructure) of ductile cast iron smelting in the Foundry Research Institute in an induction furnace. In the case of crystallization of spheroidal graphite no long...
more >>
In this study a simple procedure for the in situ identification of the intermetallic phase precipitates in the interdendritic eutectic in both wrought and cast AlFeMnSi alloys has been established and then verified by ...
more >>
Temperature properties of fly ash are closely correlated to the chemical composition and proportions of the main compounds, comprising the waste material. Statistical analysis of data obtained during the measurement of fusibility, showed a high co...
more >>
The aim of this study was to determine the effect of the chemical composition of Ni-P coating on the wettability kinetics of SAC305 liquid solder in contact with the Ni-P coating. The study was conducted in vacuum, at 230°C, for 5 minutes, usi...
more >>
The article presents the results of studies of the oxidation process conducted at 900°C for 12 hours in an atmosphere of water vapour on cast heat-resistant steel with a diversified structure (ferritic-austenitic, austenitic, and austenitic wi...
more >>
The aim of the study was to determine the possibilities and conditions for the use of a multi-channel digital recorder to control cast iron quality by rapid thermal analysis. A computer program cooperating with a digital recorder was developed. It...
more >>
A new ledeburite cast steel was designed based on a matrix precipitation hardened with intermetallic compounds of a chemical composition enriched by adding about 4.25% V totally balanced with carbon. A martensitic-austenitic matrix with a ledeburi...
more >>
The article presents research results of the process foundry return influence in the AZ91 alloy charge on the change in the structure of castings made by the high-pressure casting method, with special consideration of the formation of non-metallic...
more >>
The article presents the results of surface morphology of dust from dry dedusting of moulding sand with bentonite and mixtures of bentonite with lustrous carbon carrier using scanning electron microscopy. The study identifies the approxi...
more >>
In this work, for the first time the results of an experimental evaluation of the high temperature behavior of molten Si-B alloy in contact with refractory materials at temperatures up to 1750°C, under static argon atmosphere (p = 850-900 mbar...
more >>
The paper presents the results of thermophysical properties of selected vermicular graphite cast iron with nominal chemical composition of 3.70 C; 2.30 Si; 0.44 Mn; 0.054 P; 0.015 S; 0.017 Mg (wt. %). The comparative studies of the alloy were perf...
more >>
This study presents selected issues regarding the process of obtaining ausferrite from spheroidal cast iron without the application of thermal treatment to the casts. An ausferritic matrix, as well as strong mechanical properties, also ensures hig...
more >>
The fundamental aim of the study was to obtain high-alloy granulate. The study tests many possibilities of obtaining granulate with the use of the appropriate methods. The preliminary tests with the use of small melting units as well as granulate ...
more >>
In the technology of ductile iron manufacture, graphite precipitates take the form of spheroids, and this shape has the least harmful effect on cast iron mechanical properties. The strength of ductile iron depends mainly on its matrix, and hence o...
more >>
The paper presents the results of investigations of two cast steel grades (further referred to as Alloy 1 and Alloy 2). Alloy 1 contains, among others, 0.25% C, 11.5% Al, 5.85% Cr, 1.97% Mo, in Alloy 2 was obtained 0.035% C, 13...
more >>
| 
