1/2018 - Studies of the effect of negative pressure in the mould on the cast surface roughness

1/2018 - Alternative technology of obtaining ausferrite in the matrix of spheroidal cast iron

1/2018 - The effect of acetone on ABS used in the 3D printing of casting models

1/2018 - Microstructural characterization of Inconel 713C superalloy after creep testing

1/2018 - High temperature wettability and reactivity between molten Mg in contact with Ni substrate

1/2018 - Effect of chromium on the crystallization process, microstructure and properties of hypoeutectic Al-Si alloy

4/2017 - Mechanical properties of Si3N4 – graphene composites sintered by SPS method

4/2017 - Nanocomposite chromium coatings on aluminum alloys

4/2017 - Investigation of mechanical properties and coefficients of sound insulation of innovative silicone composite material

4/2017 - Technological solutions to extend the operating cycle of tools and industrial machinery

4/2017 - Development of a technology for the production of ceramic moulds with reduced thermal conductivity to control the solidification of thin-walled castings

4/2017 - XRD phase investigations of steam oxidized Fe and Ni rich Cr alloys

4/2017 - High temperature corrosion of metallic materials in coal fired power plant boilers

4/2017 - Cermet composite material based on aluminothermy

4/2017 - The evaluation of microporosity and mechanical properties in high strength aluminum alloys with the use of numerical analysis and computed tomography

4/2017 - Wettability, reactivity and interfaces in the Gd/TiO2 system

4/2017 - Influence of TiN nanoparticles on the microstructure and hardness of arc overlaid welding layers

4/2017 - Investigation of the interaction between the CuZn38Pb2 matrix and the Fe reinforcement phase during the production of the complex relief MMCs

4/2017 - Wetting behavior of Si-13.5B alloy on polycrystalline h-BN-based substrates

4/2017 - Viscous flow features of amorphous Zr65(Ni,Pd)35 alloy

4/2017 - Electrolyte coatings of chromium with nanodiamonds on sintered steels

4/2017 - A comparison of various imaging modes in scanning electron microscopy during evaluation of selected Si/refractory sessile drop couples after wettability tests at ultra-high temperature

4/2017 - Thermophysical properties of selected vermicular graphite cast iron alloy

4/2017 - Development and manufacturing of casting technology for crawler vehicle suspension used in wetlands

4/2017 - A comparison of the oxygen, nitrogen and hydrogen content in ductile iron castings and their effect on microstructure and mechanical properties

4/2017 - Tribological characterization of high porosity aluminum based composite materials

4/2017 - High porosity fly ash/Ni/P composite produced by electroless deposition

4/2017 - High-temperature interaction of molten vermicular graphite cast iron with Al2O3 substrate

3/2017 - Effect of the way of modification of hydrated sodium silicate on the effectiveness of the changes in the residual strength of a moulding sand

3/2017 - Thermal shock resistance of solution-hardened spheroidal cast iron with selected alloy elements

3/2017 - Surface analysis and chemical composition of dust from dry dedusting system of moulding sand with bentonite using scanning electron microscopy (SEM)

3/2017 - Effect of vanadium on the crystallization process, microstructure and properties of Al-Si alloy EN AC-46000

3/2017 - Characteristics of the thermal process of polystyrene model gasification

3/2017 - Application of squeeze casting technology to obtain aluminum alloy castings

2/2017 - Stability of metal-ceramic slurry after multiple re-melting of A359 aluminum alloy based composite reinforced with Al2O3 particles

2/2017 - Optimization of Ni and Cu additions in ADI cast iron in respect of cast cooling rate

2/2017 - Thermophysical properties of CuNiMoMn Austempered Ductile Iron

2/2017 - The role of the densification of moulding sands with inorganic binders in the modeling of their strength obtained after microwave hardening

2/2017 - The process of bonding by methacrylamide polymerization conducted in situ on a mineral matrix

2/2017 - Spectral study (FTIR, UV-Vis) of montmorillonite modified by ultrasound and potassium cations

2/2017 - Structural studies (FTIR, DRIFT) of CMS-Na0.6 etherified starch for applications in moulding sands technology

1/2017 - Effect of Sn content on corrosion resistance of iron

1/2017 - Effect of energy mix on the phenomenon of agglomeration of non-metallic inclusion particles in liquid steel

1/2017 - The use of Py-GC/MS (pyrolysis/gas chromatography/mass spectroscopy) in the analysis of foundry binders: alkaline phenolic resol resin

1/2017 - Analysis of the drying process of moistened surface layers of sand moulds and cores on the example of moulding sand with water glass

1/2017 - Studies of protective coatings used for metal moulds

1/2017 - Impact of penetration depth of protective coating on thermal deformation of masses determined by the hot distortion parameter

4/2016 - Casting in ancient literature

4/2016 - Cast iron with vermicular graphite as a prospective material

4/2016 - Analysis of non-metallic inclusions in AZ91 alloy casts with process foundry return in high-pressure die casting

4/2016 - Thermal conductivity of carbon-reinforced metal-matrix composites

4/2016 - Optimization of grain refinement and modification of the eutectic in hypo- and transeutectic Al-Si alloys

4/2016 - Development and optimization of casting technology on part of the suspension of a heavy vehicle used in difficult environmental wetland conditions

4/2016 - Chromatographic analysis of selected products of thermal decomposition of core sands made in cold-box technology

4/2016 - Studies of hardening kinetics of selected self-hardening masses at low temperatures

4/2016 - Effect of a biodegradable addition as a binary binder component for cast moulding and core sands on the properties of the binder and the sands

3/2016 - Research problematics of casting technology machines and equipment

3/2016 - Processes of pyrolysis and their effect on cast quality and working conditions

3/2016 - Effect of molybdenum on the crystallization, microstructure and properties of silumin 226

3/2016 - Thermophysical properties of Cu-C composites obtained by powder metallurgy

3/2016 - Microstructure of selected 7xxx series aluminum alloys obtained by semi-continuous casting

3/2016 - Improvement of plasticity of the AlSi11 alloy due to soft annealing treatment

3/2016 - Perspectives and directions of the development of new generation lead-free soldering alloys and their application possibilities in the consumer electronics lead-free soldering technology

2/2016 - Inoculation of Al-Si alloys using the electromagnetic stirring method

2/2016 - High temperature corrosion of low alloyed steel in air and salt mist atmospheres

2/2016 - Structural determinants of the mechanical properties of A359 + Al2O3 composites after multiple remelting

2/2016 - The assessment of the uniformity of the silica sol structure

2/2016 - CastExpert system for casting defect diagnostics

2/2016 - Determination of the optimal austempering parameters of Ni-Cu (Mo,Mn) ductile iron based on CCT and TTT diagrams

1/2016 - New ledeburite cast steel with precipitation hardened matrix

1/2016 - The AlFeMnSi intermetallics competition in the interdendritic eutectics in AlSi cast alloys influenced by cooling rate and transition metals content

1/2016 - Stress analysis in the surface layer of steel castings

1/2016 - Evaluation of selected parameters of pressure casting on the structure of silumin AlSi9Cu3

1/2016 - The effect of wetting agent on the parameters of dry moulding silica sands bonded with sodium water glass

4/2015 - Production of castings with non-dendritic structure using the Rapid Slurry Forming method

4/2015 - Comparative analysis of solidification curves obtained by thermal analysis system and multi-channel digital recorder

4/2015 - Simulation of the volume and distribution of air entrapped by liquid metal in a test mould for the pressure die casting process

4/2015 - Choice of material for the working parts of machines operating in municipal wastewater treatment plants

4/2015 - The microstructure and properties of cast alloyed G200CrNiMo4-3-3 steel

4/2015 - Comparison of parameters of the granulation process of dust waste from sand reclamation

4/2015 - Effect of oxidation and mechanical damage of PCBs with OSP finish on their solderability with SAC305 alloy

4/2015 - Building foundations for the diffusion mechanism of ceramic mould drying

3/2015 - Effect of tungsten on the solidification process, microstructure and properties of silumin 226

3/2015 - Waste moulding sand as a substitute aggregate in the manufacture of autoclaved cellular concrete

3/2015 - Aromatic compounds in waste gases formed during thermal decomposition of foundry binders

3/2015 - The use of X-ray computed tomography as a tool in assisting cast material testing

3/2015 - Assessment of quartz wettability by the ecological foundry binder modified with nanoparticles of metal oxides

3/2015 - Solidification path of the AlFeMnSi alloys in a stage of primary intermetallic phases precipitation

3/2015 - High-temperature oxidation of cast steel in water vapour

3/2015 - The role of modification processes in ledeburitic class cast steel tribological properties

2/2015 - Optimization of two-step ADI heat treatment of Cu-Ni ductile iron by means of thermal analysis methods

2/2015 - Analysis of the sulphur content in moulding sands with furan resins

2/2015 - Possibilities of waste binder reclamation using the example of moulding sands with water glass hardened by the conventional drying process

2/2015 - Choice of mould-making technology for the modified ablation casting process

2/2015 - The influence of the drop-size effect on the wetting kinetics in SAC305/Ni system

1/2015 - Influence of the structure index WB of the soluble sodium silicate on the residual strength of molding sand

1/2015 - Application of X-ray computed tomography to compare gravity casting to counter-gravity low-pressure air-melted process

1/2015 - Experimental verification of the simulation of centrifugal casting in ceramic moulds

4/2014 - Casting of wrought alloys under external pressure

4/2014 - The use of low-volume cup samplers for test solidification of cast iron

4/2014 - Evaluation of selected properties in austempered vermicular cast iron (AVCI)

4/2014 - Development of innovative method to procedure chemically active nano-coatings for moulds and cores

4/2014 - Comparison of layer thickness on materials produced by sol-gel transition on substrates removed from aqueous solutions of colloidal binders

4/2014 - Effect of phosphorus content on the wettability of Ni-P coated surfaces by SAC305 alloy

4/2014 - Comparison of the results of metrological tests obtained from X-ray computed tomography and optical 3D scanner

4/2014 - Application of topological optimisation in forming of cast cellular structures

4/2014 - Newly developed method for measuring the decomposition of nitrogen and alloying elements in nitrated and carbonitrided layers of ferrous alloys

3/2014 - Tests to produce a white cast iron die casting

3/2014 - Wetting transparency of graphene deposited on copper in contact with liquid tin

3/2014 - Shaping the microstructure and properties of silumin castings in molds cooled with water mist

3/2014 - The effect of the addition of circulating scrap on the tensile properties of die cast magnesium alloy

3/2014 - High temperature performance of materials for the energy sector exposed to water steam

3/2014 - The ecological and material-saving technology for producing brake blocks with stable parameters of quality Part 2. Verification of modernized technology under real conditions

3/2014 - Assessment of aluminium steel casting fluidity

2/2014 - The ecological and material-saving technology for producing brake blocks with stable parameters of quality. Part 1. Technology modernization using computer simulation

2/2014 - Research on ablation casting technology for aluminium alloys

2/2014 - Computer simulation of stresses occurring as a result of applied heat treatment

2/2014 - Fly ash as a reinforcement of light metal matrix composites. Part 3. The influence of a chemical composition on characteristic fusibility temperatures of coal fly ashes

1/2014 - Analysis of the chemical composition of AlMnFe and AlFeMnSi intermetallic phases in the interdendritic eutectics in the Al-alloys

1/2014 - Thermophysical properties of Ag-C composites doped with carbon nanotubes

1/2014 - The research of innovative mixtures for plaster moulds used for artistic castings

1/2014 - The optimisation of heat treatment parameters for selected cast AlZnMgCu(Mn) alloys

4/2013 - Reclamability of moulding sands with new inorganic binders for non-ferrous castings

4/2013 - The application of bentonite in classical moulding sands

4/2013 - Determination of nitrogen oxides content in the work environment – parameters characterising the method

4/2013 - The exploitation of TTT diagrams in the CAPCAST system

4/2013 - The application of Integrated Computational Materials Engineering (ICME) in foundry practice

4/2013 - The ecological aspect of moulding sands with new inorganic binders in the process of pouring moulds with liquid metal

4/2013 - The use of TTT diagrams of low-alloy ductile cast iron to develop a technology for the production of ADI

3/2013 - NICKEL LAYER DEPOSITION ON INVESTMENT CASTING POLYMER PATTERNS

3/2013 - THE COMPARISON OF THE MICROSTRUCTURE AND THE MECHANICAL CHARACTERISTIC OF AUSTEMPERED DUCTILE CAST IRON AND STEEL SUBJECT TO DYNAMIC DEFORMATION USING THE TAYLOR TEST

3/2013 - INFLUENCE OF MODIFICATION ON THE STRUCTURE AND IMPACT STRENGTH OF ALUMINIUM BRASS CuZn30Al3

3/2013 - STRUCTURE OF GUIDE GRATE IN HEAT TREATMENT TECHNOLOGICAL EQUIPMENT

3/2013 - EFFECT OF SUBSTRATE OXIDATION OF NICKEL ON WETTING BEHAVIOUR IN INDUSTRIAL ALLOY 226D/Ni SYSTEM

3/2013 - CORROSION OF STEEL AND SPHEROIDAL FERRITIC CAST IRON IN LIQUID TIN

3/2013 - SIMULATION TESTS TO FORECAST SELECTED PROPERTIES OF THIN-WALLED CASTS OF DUCTILE IRON DOMES

2/2013 - THE ASSESSMENT OF CHANGES OF THE STRUCTURE OF DUCTILE CAST IRON DEPENDING ON THE TIME AND TEMPERATURE OF THE METALLURGIC PROCESS

2/2013 - THE STUDY OF FACTORS ALTERING PHYSICAL AND CHEMICAL STATE OF LIQUID CAST IRON AND A SELECTION OF THE MATERIAL PROPERTIES

2/2013 - APPLICATION OF THE FLOW 3-D SOFTWARE FOR SIMULATION OF THE SPHEROIDAL IRON CASTING AND SOLIDIFICATION. PART 2

2/2013 - SIMULATION RESEARCH OF THE FLOW OF THE MEDIA THROUGH A BALL REFLUX VALVE AT VARIOUS DENSITIES OF THE FLOATING BALL WITH THE USE OF FLOW-3D SOFTWARE

2/2013 - AN OPTIMISING NUMERICAL ANALYSIS OF THE DISTRIBUTION OF STRESSES AND DISPLACEMENTS IN THE RUBBER CURING PROCESS OF CHECK VALVE BALLS

2/2013 - CAST Al-Si MATRIX COMPOSITES REINFORCED WITH INTERMETALLIC PHASES

1/2013 - BASIC ISSUES RELATED TO THE MEASUREMENT OF SIZE AND PARTICLE SIZE DISTRIBUTION

1/2013 - IONIC CONTAMINATION TESTS ON PRINTED CIRCUIT BOARDS

1/2013 - TREATMENT OF SELECTED FOUNDRY WASTE USING BIODEGRADABLE METHOD (PRELIMINARY RESEARCH)

1/2013 - USE OF FLOW-3D PROGRAM FOR SIMULATION OF POURING AND SOLIDIFICATION PROCESS OF DUCTILE CAST IRON CASTINGS. PART 1

4/2012 - EFFECT OF CALCIUM CARBIDE MODIFICATION ON THE MECHANICAL PROPERTIES OF BA 1044 BRONZE

4/2012 - THE EFFECT OF Ca ADDITION ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AZ91 ALLOY

4/2012 - EFFECT OF ZINC CONTENT AND TEMPERATURE ON NICKEL SOLDERABILITY WITH Sn-xZn (x = 4.5, 90, 95 wt%) ALLOYS

4/2012 - SELECTED THERMOPHYSICAL PROPERTIES OF ALUMINUM MATRIX COMPOSITES SUBJECTED TO MULTIPLE REMELTING

4/2012 - ON THE DAMPING CAPACITY OF COMPOSITE MATERIALS

4/2012 - AN INNOVATIVE METHOD FOR THE FABRICATION OF COMPOSITE RODS REINFORCED WITH WASTE MATERIALS

4/2012 - TECHNOLOGICAL ASPECTS OF ALLOYS BASED ON THE Fe-Al SYSTEM

4/2012 - ANALYSIS OF THE STATE OF STRESS IN CAST BODIES, COVERS AND WEDGES OF THE WEDGE GATE VALVES USED IN GAS NETWORKS

4/2012 - SCIENTIFIC DATABASES CENTER AS A BASIS AND SUPPORT FOR RESEARCH IN THE FOUNDRY RESEARCH INSTITUTE. IMPLEMENTATION OF IT SYSTEM

4/2012 - CHANGES IN THE MICROSTRUCTURE OF PA9 ALLOY UNDER THE EFFECT OF SQUEEZE PRESSURE

3/2012 - A NOVEL METHOD FOR THE OXYGEN ACTIVITY MEASUREMENT APPLIED IN CONTROL OF THE DUCTILE IRON MANUFACTURING PROCESS

3/2012 - EFFECT OF ZINC CONTENT AND TEMPERATURE ON COPPER SOLDERABILITY WITH Sn-xZn (x = 4.5; 90; 95 wt.%) ALLOYS

3/2012 - HIGH-QUALITY FOUNDRY BENTONITE MADE FROM THE RAW DRIED MATERIAL AND SELECTED FRACTIONS FORMED IN THE PRODUCTION OF HYGIENE SORBENTS

3/2012 - EFFECT OF SURFACE COATING AND FLUX TYPE ON THE SOLDERABILITY OF PCB BY LEAD-FREE SAC305 ALLOY

3/2012 - STUDIES OF ODOUR NUISANCE IN INVESTMENT FOUNDRY

3/2012 - INFLUENCE OF CHEMICAL MODIFICATION OF THE SOLUBLE SODIUM SILICATE ON THE ZETA POTENTIAL OF THE COLLOIDAL PARTICLES IN A “SOLUBLE SODIUM SILICATE – ESTER HARDENER” GELLING SYSTEM

2/2012 - EFFECT OF THERMAL CONDITIONING OF THE SODIUM SILICATE GLASS ON THE VALUE OF ZETA POTENTIAL OF THE SOLUBLE SODIUM SILICATE

2/2012 - CONVERSION COATINGS ON MAGNESIUM ALLOY DIE CASTINGS PART II: DEVELOPMENT OF A TECHNOLOGY FOR FABRICATION OF DECORATIVE AND PROTECTIVE COATINGS ON MAGNESIUM ALLOY DIE CASTINGS

2/2012 - STUDY OF FILTRATION CHARACTERISTICS OF THE EXPERIMENTAL CERAMIC LAYERS

2/2012 - SIMULATION STUDIES (USING METHODS OF NUMERICAL CALCULATIONS) OF POURING AND SOLIDIFICATION OF SELECTED IRON ALLOY CASTINGS

1/2012 - Fly ash as the reinforcement of light alloy metal matrix composites. Part 2: High temperature investigations

1/2012 - Making investment patterns – computer simulation

1/2012 - Laboratory tests to minimise odoriferous emissions of organic pollutants during gasification of polystyrene patterns

1/2012 - Technical and design study of the use of rapid prototyping technique to make an art casting of Medal commemorating the 65th Anniversary of the establishment of Foundry Research Institute in Cracow

1/2012 - The research of innovative mixtures for plaster moulds used for artistic castings

4/2011 - STUDIES OF THEORETICAL AND PRACTICAL ASPECTS OF THE DESIGN OF MATERIALS LIGHTER THAN AIR

4/2011 - CONVERSION COATINGS ON MAGNESIUM ALLOY DIE CASTINGS PART 1: THE EFFECT OF TECHNOLOGICAL PARAMETERS OF THE PRESSURE DIE CASTING PPROCESS ON THE QUALITY OF CASTINGS MADE FROM THE AZ91 ALLOY

4/2011 - ANALYSIS OF GATING AND FEEDING SYSTEMS FOR CASTING OF STREET INLETS WITH AND WITHOUT THE PROCESS OF FILTRATION

4/2011 - INTELLIGENT NANOSTRUCTURES – A LOT OF TALK ABOUT NOTHING? MYTHS AND FACTS

3/2011 - QUANTITATIVE ANALYSIS OF CAST IRON MICROSTRUCTURE IN TERMS OF THE APPARATUS AND METHODOLOGY

3/2011 - FLY ASH AS A COMPONENT OF THE REINFORCEMENT OF LIGHT ALLOY METAL MATRIX COMPOSITES. PART 1. COAL COMBUSTION BY-PRODUCTS MANAGEMENT

3/2011 - THERMOPHYSICAL PROPERTIES OF CAST IRON USED IN THE MANUFACTURE OF BRAKE DISCS

3/2011 - MODEL STUDIES OF SAND RECLAMATION FROM THE WASTE MOULDING MIXTURES WITH NEW INORGANIC BINDER USED FOR CASTING OF ALUMINIUM ALLOYS

2/2011 - TECHNOLOGICAL ASPECTS OF THE SYNTHESIS OF METAL MATRIX COMPOSITES REINFORCED WITH CENOSPHERES

2/2011 - APPLICATION OF MOULDING SANDS WITH GEOPOLYMER BINDER IN THE MANUFACTURE OF CASTINGS FROM ALUMINIUM ALLOYS

2/2011 - EFFECT OF HEAT TREATMENT ON STRUCTURE OF THE INCONEL 740 TYPE ALLOY

2/2011 - THE STUDY OF THE KINETICS OF SOLIDIFICATION AND COOLING OF PATTERN MATERIAL IN A DIE

1/2011 - EFFECT OF SQUEEZE PRESSURE ON MICROSTRUCTURAL CHARACTERISTICS OF THE AlSi7Mg ALLOY

1/2011 - THE THERMAL ANALYSIS OF POLYSTYRENE FOUNDRY MODEL

1/2011 - MICROSTRUCTURE EVOLUTION DURING PERITECTIC L + Al6Mn(Fe) → α-Al + α-AlMnFeSi PROCESS IN AlFeMnSi ALLOYS

1/2011 - STUDYING THE EMISSION OF PRODUCTS FORMED DURING EVAPORATION OF POLYSTYRENE PATTERNS IN THE LOST FOAM PROCESS IN TERMS OF THE WORK ENVIRONMENT

4/2010 - KINETICS OF THE DECOMPOSITION OF AUSFERRITIC STRUCTURE IN COPPER-NICKEL ADI

4/2010 - MANUFACTURING PROCESS AND MECHANICAL PROPERTIES OF ORDERED, CELLULAR CONSTRUCTIONS CAST FROM Al-Si ALLOY

4/2010 - COMPARATIVE STUDIES OF THE CHEMICAL COMPOSITION OF GOLDSMITH OBJECTS FROM THE COLLECTION OF REGIONAL MUSEUM IN TORUN

3/2010 - EFFECT OF ULTRASOUNDS ON LOW-ENERGY PROCESSES AND ELECTROLYTIC CONDUCTIVITY OF MOULDING DUST WASTE SUBJECTED TO ADVANCED OXIDATION

3/2010 - EFFECT OF DIRECT IN-MOULD INOCULATION ON THE STRUCTURE OF IRON ALLOYS

3/2010 - SIMULATION STUDIES OF MOULD FILLING CONDITIONS WITH MOLTEN METAL IN EVAPORATIVE PATTERN TECHNOLOGY

3/2010 - ALFA COMPOSITES FABRICATED BY MECHANICAL ALLOYING - ANALYSIS OF THE REINFORCING PHASE DISTRIBUTION BY COMPUTED MICROTOMOGRAPHY

2/2010 - WETTING and JOINING of HfB2 and Ta with Ni

2/2010 - DEVELOPMENT OF TECHNOLOGY TO MANUFACTURE „MODIFIED BENTONITE” USED IN PRODUCTION OF STEEL CASTINGS WITH SPECIAL REGARD TO CASTING SURFACE QUALITY

2/2010 - EFFECT OF MODIFICATION AND HEAT TREATMENT (SOLUTION HEAT TREATMENT, AND SOLUTION HEAT TREATMENT + AGEING) ON STRUCTURE AND MECHANICAL PROPERTIES OF CuAl10Fe3Mn2 BRONZE

1/2010 - NITROGEN AND BORON EFFECT ON STRUCTURAL TRANSFORMATIONS TAKING PLACE IN DUCTILE IRON DURING AUSTEMPERING TREATMENT

1/2010 - SCANNING EXAMINATIONS OF MAGNESIUM- AND LITHIUMBASED ALLOYS OF TWO-PHASE α-β AND MONOPHASE β STRUCTURE

1/2010 - TRIALS TO FABRICATE BY MECHANOSYNTHESIS A CuXAlY – BASED COMPOSITE REINFORCED WITH Al2O3 PARTICLES

1/2010 - EFFECT OF TESTING CONDITIONS AND OXIDATION ON WETTING BEHAVIOUR IN Al/Ni SYSTEM

4/2009 - EFFECT OF OXIDE NANOCOATING ON SURFACE TENSION MEASUREMENTS OF PURE TIN

4/2009 - SELECTED THERMO-PHYSICAL PROPERTIES OF ZIRCONIA POWDERS BASED ON RARE EARTH ELEMENTS SUCH AS RE2Zr2O7 (RE - Gd, La, Sm, Nd) FOR THERMAL SPRAY COATING OF BARRIER LAYERS

4/2009 - METODA PRZETWARZANIA ŻELIWA W STANIE PÓŁSTAŁYM

4/2009 - STRESS MODELS AND THEIR APPLICATION IN EXPLANATION OF CASTING DEFECT INFLUENCE ON THE CAST PART MECHANICAL BEHAVIOUR

3/2009 - MECHANICAL PROPERTIES OF HIGH-ALLOYED, DISPERSION-HARDENED, MARTENSITIC CAST STEEL AFTER MULTI-STAGE HEAT TREATMENT

3/2009 - AN ASSESSMENT OF NITROGEN CONTENT EFFECT ON THE MECHANICAL PROPERTIES OF MARTENSITIC CAST STEEL

3/2009 - CHEMICAL COMPOSITION OF THE 16th – 18th CENTURY GUN BARRELS AND CANNON BALLS FROM AN ARMOURY OF THE ROYAL WAWEL CASTLE IN CRACOW EXAMINED BY X-RAY MICROFLUORESCENCE ANALYSIS

3/2009 - FROM FORGING TO CASTING – A CONVERSION IN BOTH MATERIAL AND DESIGN

2/2009 - DETERMINATION OF THERMAL CONDUCTIVITY OF SELECTED TYPES OF DUCTILE IRON (SPHEROIDAL GRAPHITE/CAST IRON) BY MEANS OF THERMAL DIFFUSIVITY MEASUREMENTS WITH LASER-FLASH METHOD

2/2009 - EFFECT OF HEAT TREATMENT ON STRUCTURE AND PROPERTIES OF ALUMINIUM-NICKEL BRONZE

2/2009 - EFFECT OF HEAT TREATMENT ON THE MECHANICAL PROPERTIES OF GS-20Mn5 CAST STEEL ASSIGNED FOR OPERATION AT LOW TEMPERATURES

1/2009 - COMPARATIVE STUDIES OF THE EFFECT OF VARIOUS ADDITIVES ON STRUCTURE AND MECHANICAL PROPERTIES OF CuAl10Fe3Mn2 ALLOY

1/2009 - SELECTED PROBLEMS OF A TECHNOLOGY OF THE AZ91 MAGNESIUM ALLOY MELT TREATMENT

1/2009 - ANALYSIS OF THE POURING AND SOLIDIFICATION PROCESS OF ALLOYED STEEL CASTINGS FOR LOW - TEMPERATURE PERFORMANCE

1/2009 - IDENTIFICATION BY DSH POWDER METHOD OF CRYSTAL PHASES OF SILICA IN DUST EMITTED FROM SAND FOUNDRY

4/2008 - NEW COAL DUST SUBSTITUTES FOR BENTONITE MOULDING SANDS USED IN MANUFACTURE OF CASTINGS FROM MALLEABLE IRON AND ALUMINIUM ALLOYS

4/2008 - HIGH-TEMPERATURE SULPHIDATION OF Fe-Cr-Al STEELS: THE PRESENT STATE OF THE ART AND FUTURE RESEARCH

4/2008 - EVALUATING THE EFFECTIVENESS OF SPECIAL HEAT TREATMENT CARRIED OUT ON AZ91 MAGNESIUM ALLOY TO PREVENT THE GRAIN GROWTH

3/2008 - RECYCLING OF WASTE FLY ASH FORMED DURING COMBUSTION OF HARD COAL FOR USE IN MOULDING MIXTURES MANUFACTURE

3/2008 - EVALUATING THE FEASIBILITY OF MAKING ALUMINIUM ALLOY NANOMODIFIERS BY THE METHOD OF MECHANICAL ALLOYING

3/2008 - MICROADDITIONS OF BORON AND VANADIUM IN ADI. PART 2. OWN INVESTIGATIONS

3/2008 - HIGH TEMPERATURE BEHAVIOR OF Fe-Cr-Al STEEL UNDER OXIDIZING CONDITIONS – A REVIEW

2/2008 - APPLICATION OF DIAMOND LAYERS AND DIAMOND-LIKE COATINGS ON MEDICAL TOOLS AND IMPLANTS

2/2008 - APPLICATION OF GEOPOLYMER BINDER IN MANUFACTURING OF CASTING FROM FERROUS ALLOYS

2/2008 - STRUCTURE FORMATION AND PROPERTIES OF Cr3C2 – NiCr CARBIDE COATINGS APPLIED BY PLASMA SPRAYING ONTO THE SURFACE OF DUCTILE IRON CASTINGS

2/2008 - HYDROGEN CONTENT IN GREY IRON CASTINGS MADE BY THE LOST FOAM PROCESS

2/2008 - STUDIES ON THE PROPERTIES IMPROVEMENT AND APPLICATION OF NEW INORGANIC BINDERS USED IN THE MANUFACTURE OF ENVIRONMENT-FRIENDLY MOULDING AND CORE SANDS

1/2008 - CONTROL OF GRADED STRUCTURE IN GASARS

1/2008 - DETERMINATION OF PHYSICOCHEMICAL PROPERTIES AND THE THERMAL STABILITY OF HYDROXYAPATITE

1/2008 - WEAR RESISTANCE AND BIOCOMPATIBILITY OF DENTAL TOOLS UPGRADED BY DIFFERENT COATINGS

1/2008 - AN ASSESSMENT OF THE POSSIBILITIES TO SHAPE THE MECHANICAL PROPERTIES OF CAST AZ91 MAGNESIUM ALLOY THROUGH APPLICATION OF PROPER HEAT TREATMENT

1/2008 - INVESTIGATIONS OF A CORRELATION BETWEEN THE TYPE AND AMOUNT OF MODIFIER, HIGH-TEMPERATURE TRANSFORMATIONS AND RESIDUAL STRENGTH OF SANDS WITH MODIFIED SODIUM SILICATES