Your search for hardening resulted in 15 matches...
The Inconel 740 type nickel alloy was melted in a vacuum, medium frequency induction furnace. During melting the inert gas (argon) atmosphere was used Metal was poured into a ceramic mould based on ethyl silicate. ...
more >>
The article presents the results of laboratory and industrial tests on the application of a new geopolymer Rudal A binder used in production of moulding and core sands for castings from carbon and alloyed cast stee...
more >>
In the present paper research results of microstructure and selected mechanical properties of composite on EN AC-AlSi11 alloy matrix with reinforcement in the form of particle of Cr-Fe-C alloy (composite ex situ) and carbonitrides Ti, Zr, V (compo...
more >>
The article presents the results of preliminary studies on the possible application of innovative activation treatments of inorganic binders during the reclamation of waste water glass moulding sands hardened by conventional drying. The test mould...
more >>
The results of studies of the process of pressure-free granulation of foundry dust were described, including dust generated in the mechanical reclamation of waste bentonite sand (Dust 1), dust generated in the dry mechanical reclamation of waste s...
more >>
A new ledeburite cast steel was designed based on a matrix precipitation hardened with intermetallic compounds of a chemical composition enriched by adding about 4.25% V totally balanced with carbon. A martensitic-austenitic matrix with a ledeburi...
more >>
An attempt has been made to determine the effect of the addition of an agent wetting the surface of silica sand grains, introduced in order to increase the hardening efficiency of selected physical methods applied to the ecological foundry sands b...
more >>
Loose rapid hardening masses with synthetic resins, customarily called cold-box technologies, have dominated the process of casting core production. A distinguishing feature of these technologies is the manner of mass preparation without the use o...
more >>
The article presents an analysis of the kinetics of the hardening process of self-hardening masses. In this study, moulding sand with a quartz sand grain matrix by Sibelco, main fraction Fm 0.40; 0.32; 0.20 mm, was used. Two resins were...
more >>
An analysis of the drying process of surface layers of sand moulds and cores (made of loose self-hardening moulding sand with hydrated sodium silicate hardened with a liquid ester hardener) which was previously subjected to the process of moisture...
more >>
The study attempts to complement the information on the effect of the density of moulding sands with inorganic binders on basic strength parameters, i.e. the tensile and bending strength of moulding sands with hydrated sodium silicate, after the p...
more >>
The process of bonding by polymerization of methacrylamide was performed in situ on a quartz matrix at 25°C as well as in a microwave field (150°C; 800 W; 2.45 GHz). The composition of the reaction mixture, beside methylacrylamide as the m...
more >>
Electrodes for manual arc overlay welding with coating containing nanomodifier TiN in concentrations between 0.2% and 1.5% were developed and manufactured. Samples of welded overlay layers with electrodes were both examined by electron microscopy ...
more >>
This article presents selected research methods related to protective coatings used for sand moulds and cores in the foundry industry. The research methodology has been divided into studies of the technological properties of sand moulds and cores ...
more >>
The designing of new light-weight alloys for continuous replacement of cast iron and steel parts is now the mainstream regarding energy saving and improvement of fuel consumption in the transportation sector. Parallel with the remarkable advances ...
more >>
| 
