Your search for hardness resulted in 28 matches...
The paper presents the results of studies on the effect of external pressure, applied on metal during squeeze casting process, on the structure of AlSi7Mg alloy. The obtained results were completed with examination...
more >>
The article discusses problems related with the evaluation of the effect of modification and multivariant heat treatment on mechanical properties of CuAl10Fe3Mn2 aluminium bronze. The evaluation was based on the re...
more >>
The role of interstitial elements, i.e. nitrogen and boron, in the process of ductile iron solidification and heat treatment of castings was discussed. Austempering of ductile iron aims at obtaining an ausferritic ...
more >>
The wettability tests were carried out under a vacuum at 700°C in the drop/substrate couples, where drop is pure aluminium (99.999%), substrate - Ni (99.8%) and Niox (oxidized). Test were carried out...
more >>
High-alloyed Cr-Ni-Cu cast steel with additions of Mo and Nb and high nitrogen content was melted. The cast test ingots were subjected to a heat treatment. Metallographic examinations were made under an optical mic...
more >>
The GX5CrNiCu16-4 martensitic cast steel with graded nitrogen content comprised in a range of 0,064-0,12% was melted; the chemical composition, including oxygen and nitrogen content, was determined. Test bars were ...
more >>
The aim of this publication is to assess the effect of different types of the standard heat treatment on changes in mechanical properties at room temperature of magnesium alloy from AZ91 family referred to the same...
more >>
The study presents the results of structure examinations and mechanical tests carried out on coatings based on Cr3Cr2-NiCr chromium carbide, applied onto the surface of ductile iron castings. The chromiu...
more >>
Melting of cast steel based on Fe-Al system was described. Problems of technological nature related with the melting process performance, starting with computer simulation and in the casting treatment ending, were discussed. The outcome of the stu...
more >>
In the present paper research results of microstructure and selected mechanical properties of composite on EN AC-AlSi11 alloy matrix with reinforcement in the form of particle of Cr-Fe-C alloy (composite ex situ) and carbonitrides Ti, Zr, V (compo...
more >>
The article attempts to compare the resistance of austempered ductile cast iron and S215 steel to dynamic loads. The samples were subject to research using the Taylor test methodology at different speeds of deformation, in order to determine the c...
more >>
The aim of this study was to determine the impact of technological factors (surface treatment and contact time) on the kinetics of wetting of nickel substrates by a liquid aluminum alloy. Wetting kinetics studies were carried out in vacuum at 700&...
more >>
The work focuses on tribological tests of G200CrNiMo4-3-3 cast steel in the state without modification as well as after modification with FeSi and FeB. The FeSi modification reduced the secondary cementite precipitation in the Widmanstätten p...
more >>
In the research part of this study, several types of materials were proposed, including ADI (Austempered Ductile Iron) subjected to four different types of heat treatment, using cast manganese steel and cast nickel-copper steel. The use of these m...
more >>
The subject of the study is the analysis of the microstructure and mechanical properties of cast G200CrNiMo4-3-3 steel. The investigated alloyed cast steel, containing approximately 2% C, is nearly an ideal material for the hot mill work rolls, an...
more >>
A new ledeburite cast steel was designed based on a matrix precipitation hardened with intermetallic compounds of a chemical composition enriched by adding about 4.25% V totally balanced with carbon. A martensitic-austenitic matrix with a ledeburi...
more >>
The article presents the results of investigations of the effect of selected casting parameters on the structure of casts made under high pressure by means of the casting machine produced by BÜHLER, type H630-B, out of the AlSi9Cu3 alloy from...
more >>
The article presents the results of studies of hypoeutectic silumin with a molybdenum addition used for pressure casting. The studies included a thermal-derivative analysis of the crystallization process, a metallographic analysis of the microstru...
more >>
The study involved the preparation of seven melts of spheroidal cast iron solution reinforced by means of an elevated content of silicon, including Cu, Mo and Ni additions. Thermal analyses of the melted cast iron were made and the ...
more >>
The paper presents the results of the study of Al-Si alloys with a vanadium addition used in pressure casting. The hypoeutectic Al-Si alloy grade EN AC-46000 was applied as the initial alloy. The master alloy AlV10 was introduced into the initial ...
more >>
Silicon nitride powder with a small addition of magnesium oxide and yttria stabilized tetragonal zirconia fine particles was used as a starting material. Multilayer graphene nanoplatelets were used as filler for silicon nitride based composites. G...
more >>
Chromium coatings modified with nanodiamond particles were deposited on aluminum alloys. The concentration of the nanodiamond particles in the chrome plating electrolyte was from 5 to 25 g/l. The thickness of the layer varied between 30 and 70 &mu...
more >>
Electrodes for manual arc overlay welding with coating containing nanomodifier TiN in concentrations between 0.2% and 1.5% were developed and manufactured. Samples of welded overlay layers with electrodes were both examined by electron microscopy ...
more >>
The present paper is relevant to the investigation of the interaction between the copper alloy metal matrix (CuZn38Pb2) and the reinforcement phase (Fe) during the production of "hybrid" complex relief MMCs. An innovative production method is used...
more >>
Sintered ferrous components were coated with electrochemical chromium coatings modified with nanodiamond particles. The nanodiamond particles were produced by detonation synthesis with an average grain size 8 nm. The objective of this study was to...
more >>
The paper presents the results of studies of hypoeutectic silumin with a chromium addition used for pressure casting. A silumin with the composition similar to that of EN AC-46000 was used as the initial one. In order to introduce chromi...
more >>
In the technology of ductile iron manufacture, graphite precipitates take the form of spheroids, and this shape has the least harmful effect on cast iron mechanical properties. The strength of ductile iron depends mainly on its matrix, and hence o...
more >>
This article presents a method of melting zirconium alloy in an induction vacuum furnace using a thermally insulated graphite crucible. The design of the Supercast Titan induction centrifugal furnace allows for the quick melting of metal alloys in...
more >>
| 
