Your search for nickel resulted in 22 matches...
The Inconel 740 type nickel alloy was melted in a vacuum, medium frequency induction furnace. During melting the inert gas (argon) atmosphere was used Metal was poured into a ceramic mould based on ethyl silicate. ...
more >>
To determine the kinetics of ausferrite decomposition in copper-nickel ADI, a kinetic model of Johnson-Mehl-Avrami (JMA), designed for the investigations under non-isothermal conditions, was used. Applying the Netz...
more >>
The wetting behavior of Ni on a HfB2/Ta assembly was examined in vacuum using dense HfB2 (99.5% purity) produced, without sintering aids, by HP-HT at 7 GPa. The real-time imaging by a high res...
more >>
The wettability tests were carried out under a vacuum at 700°C in the drop/substrate couples, where drop is pure aluminium (99.999%), substrate - Ni (99.8%) and Niox (oxidized). Test were carried out...
more >>
The effect of heat treatment on structure and mechanical properties of B1044 (CuAl10Fe4Ni4) alloy was investigated. In the examined alloy, the content of aluminium, iron and nickel results in the formation of struc...
more >>
The article is devoted to complex studies of diamond-like coatings applied by the PAPVD technique to improve the surface of medical tools and implants in terms of better anticorrosive behaviour and biocompatibility...
more >>
In the second part of the study, describing the role of vanadium and boron microadditions in the process of structure formation in heavy-walled castings made from ADI, the results of own investigations were present...
more >>
The aim of this study was to determine the effect of temperature and zinc content on the solderability of nickel substrates with liquid Sn-xZn alloys (4.5, 90, 95 wt% Zn). Solderability tests were carried out by the wetting balance method which al...
more >>
The article presents a method of modification of ceramic mould surface on the boundary between lost-wax model - ceramics by using a layer of nickel on a disposable model made of a specified type of polymer e.g. polymethyl methacrylate (PMMA) and t...
more >>
The aim of this study was to determine the impact of technological factors (surface treatment and contact time) on the kinetics of wetting of nickel substrates by a liquid aluminum alloy. Wetting kinetics studies were carried out in vacuum at 700&...
more >>
The presented paper is a description of the significance of CCT and TTT diagrams in the processes of heat treatment of ductile cast iron, and especially during the production of ADI. A review of literature in the subject was made. Own research inc...
more >>
This text presents the methodology and results of testing aluminium steel casting fluidity obtained in the bar test. These results have been compared with the fluidity of chrome-nickel-copper steel casting tested under the same conditions. The cou...
more >>
The aim of this study was to determine the effect of the chemical composition of Ni-P coating on the wettability kinetics of SAC305 liquid solder in contact with the Ni-P coating. The study was conducted in vacuum, at 230°C, for 5 minutes, usi...
more >>
The studies of the drop-size effect on the wetting kinetics of the nickel substrate by lead-free solder were performed by the sessile drop method in a vacuum at a temperature of 260°C.In this work, Sn-based alloy SAC305 (Ag - 3.0 wt. %, ...
more >>
In the research part of this study, several types of materials were proposed, including ADI (Austempered Ductile Iron) subjected to four different types of heat treatment, using cast manganese steel and cast nickel-copper steel. The use of these m...
more >>
The study involved the preparation of seven melts of spheroidal cast iron solution reinforced by means of an elevated content of silicon, including Cu, Mo and Ni additions. Thermal analyses of the melted cast iron were made and the ...
more >>
The aim of the present study is to create a composite material possessing useful properties enabling the waste fly ash to be utilized. To obtain the final material, fly ash is subjected to separation by size and density. The innovative approach to...
more >>
In the technology of ductile iron manufacture, graphite precipitates take the form of spheroids, and this shape has the least harmful effect on cast iron mechanical properties. The strength of ductile iron depends mainly on its matrix, and hence o...
more >>
The essence of the conversion process is the introduction of innovative in terms of materials and technology of cast parts, as components of manufactured machines and equipment in place of the traditional elements forged, welded, mechanically asse...
more >>
As a part of the international project carried out at the Foundry Research Institute in Krakow in cooperation with Energy Industries of Ohio, anopen induction furnace melting technology and gravity casting of nickel superalloys have been developed...
more >>
The present study was created as a result of the execution of the project entitled "Technological conversion of nickel alloys working under extreme conditions". This project, contract No.: TANGO2/340100/NCBR/2017 of 28.04.2017 ...
more >>
The aim of the second part of the study was to make utility castings of refractory nickel alloys, traditionally processed plastically, intended for use in extremely difficult conditions. The related technological problems and obtained ef...
more >>
| 
