Your search for wettability resulted in 13 matches...
The wettability tests were carried out under a vacuum at 700°C in the drop/substrate couples, where drop is pure aluminium (99.999%), substrate - Ni (99.8%) and Niox (oxidized). Test were carried out...
more >>
The article presents a method of modification of ceramic mould surface on the boundary between lost-wax model - ceramics by using a layer of nickel on a disposable model made of a specified type of polymer e.g. polymethyl methacrylate (PMMA) and t...
more >>
The aim of this study was to determine the impact of technological factors (surface treatment and contact time) on the kinetics of wetting of nickel substrates by a liquid aluminum alloy. Wetting kinetics studies were carried out in vacuum at 700&...
more >>
The aim of this study was to determine the effect of the chemical composition of Ni-P coating on the wettability kinetics of SAC305 liquid solder in contact with the Ni-P coating. The study was conducted in vacuum, at 230°C, for 5 minutes, usi...
more >>
The studies of the drop-size effect on the wetting kinetics of the nickel substrate by lead-free solder were performed by the sessile drop method in a vacuum at a temperature of 260°C.In this work, Sn-based alloy SAC305 (Ag - 3.0 wt. %, ...
more >>
The results of studies of quartz wettability by an ecological foundry binder are presented. Water glass modified with nanoparticles of metal oxides, such as: MgO, Al2O3 and ZnO in organic solvents (methanol or propanol) was u...
more >>
An attempt has been made to determine the effect of the addition of an agent wetting the surface of silica sand grains, introduced in order to increase the hardening efficiency of selected physical methods applied to the ecological foundry sands b...
more >>
The new technological challenges and the high economical and commercial potential connected with the development of new generation soldering alloys used in the consumer electronics lead-free soldering technology is a subject which is gaining incre...
more >>
High-temperature interaction of liquid Gd in contact with dense, polycrystalline TiO2 substrate, was investigated. Wettability and reactivity tests were carried out at two different temperatures (1362°C and 1412°C) in flowing ga...
more >>
In this work, for the first time the results of an experimental evaluation of the high temperature behavior of molten Si-B alloy in contact with refractory materials at temperatures up to 1750°C, under static argon atmosphere (p = 850-900 mbar...
more >>
In this work, FEI SciosTM field emission gun scanning electron microscope (FEG SEM) equipped with a unique combination of analytical and imaging detectors was utilized to examine structure and chemistry of selected Si/refractory couples...
more >>
The wetting behavior and reactivity between molten cast iron (originally vermicular graphite cast iron, containing in wt. %: 3.70 C, 2.30 Si, 0.44 Mn, 0.054 P, 0.017 Mg, 0.015 S) and commercial polycrystalline alumina (Al2O3 ...
more >>
The paper focuses on the experimental investigation of high temperature wetting behaviour of liquid pure Mg during a contact heating on Ni substrate by the sessile drop method. High temperature wettability test was performed by the ...
more >>
|